Cylindrical Roller Bearings

Makes A Difference

Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or are without ribs, the inner rings have one or two rigid ribs or are designed without ribs
The cage prevents the cylindrical rollers coming into contact with each other during rolling
The cylindrical roller bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with suffix E have a larger roller set and are thus designed for extremely high load carrying capacity
The bearings can be taken apart and can therefore be fitted and dismantled more easily. Both bearing rings can therefore have an interference fit
Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings

Low-friction cylindrical roller bearings LSL and ZSL are single row, self-retaining and correspond to dimension series 23. The bearings have solid outer rings with two ribs, while the inner rings have one rib
The inner ring can be removed and this gives easier fitting of the bearings. Disc cages or spacers prevent the cylindrical rollers coming into contact with each other during rolling
Many sizes are supplied in X-life design. These bearings are indicated in the dimension tables. Bearings of X-life quality have a lower roughness Ra and superior geometrical accuracy of the raceways than comparable designs that are not X-life

Cylindrical roller bearings of this type are double row precision bearings for machine tools. They allow radially rigid, high precision bearing arrangements and are mainly used for the radial support of main spindles
The bearings comprise solid outer rings without ribs, solid inner rings with three ribs and cylindrical roller and cage assemblies with solid brass cages
For optimum setting of the radial internal clearance, the inner ring has a tapered bore with a taper of 1:12. The cylindrical roller bearings can be dismantled and are therefore easier to fit and remove. Both bearing rings can therefore have an interference fit

Full complement cylindrical roller bearings have solid inner and outer rings and rib-guided cylindrical rollers. Since these bearings have the largest possible number of rolling elements, they have extremely high radial load carrying capacity, high rigidity and are suitable for particularly compact designs. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage
Full complement cylindrical roller bearings are available as non-locating, semi-locating and locating bearings and in single and double row designs

Cylindrical roller bearings with snap ring grooves are full complement, self-retaining units comprising solid inner and outer rings, rib-guided cylindrical rollers and sealing rings
The outer rings have grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and are held together by a steel strip that is rolled into place
Cylindrical roller bearings with snap ring grooves are locating bearings. These bearings are highly rigid and can support axial forces in both directions as well as high radial forces
Due to the full complement design of these bearings, they have the largest possible number of rolling elements and thus extremely high basic dynamic and static load ratings. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage