Precision Slides

Makes A Difference

Incorporates pre-loaded linear bearings type RSD and double-side track-rail, including roller cages.
Slide-top and -base have equal lengths
2 standard strokelengths (N- and L-stroke). Linear strokes are limited by internal mounted end-stops, two in the slide-top and one or two in the base-plate, depending on RTL or RTN version. N-stroke: for normal stroke/travel, with normal loads L-stroke: for longer stroke/travel, with reduced loads
Size 1.5 and 2 mm: use in each direction (with brass roller cage type CC). Size 3, 4, 6 (pitch t=9mm) and 9mm (pitch t=14mm): horizontal fitting model (with steel roller cage type AA). Vertical fitting model (with brass roller cage type DD).
All mounting surfaces are precision ground. One flank of the slide ( the side opposite to the adjustment screws) is ground parallel to the linear bearings to serve as a Reference Face.
The slide-top is provided with tapped attachment holes, drilled to a standard configuration. The slide-base is equipped with countersunk-bored holes, which accept sockethead screws.

Incorporates pre-loaded linear bearings type RSD and double-sided track-rail, including roller cages.
Slide-top and -base have equal lengths.
2 standard strokelengths (N- and L-stroke). Linear strokes are limited by internal mounted endstops, two in the slide-top and one or two in the baseplate, depending on RTLA or RTNA version. N-stroke: for normal stroke/travel, with normal loads. L-stroke: for longer stroke/travel, with reduced loads.
Size 1.5 and 2 mm: use in each direction (with brass roller cage type CC). Size 3, 4, 6 (pitch t=9 mm) and 9mm (pitch t=14mm), horizontal fitting model (with steel roller cage type AA). Vertical fitting model (with brass roller cage type DD).
All mounting surfaces are precision ground. One flank of the slide ( the side opposite to the adjustment screws) is ground parallel to the linear bearings to serve as a Reference Face.
The slide-top is provided with tapped attachment holes, drilled to a standard configuration. The slide-base is equipped with countersunk-bored holes, which accept sockethead screws.

Incorporates pre-loaded linear bearings type RSD and double-sided track-rail, including roller cages.
Linear strokes are limited by the endplates. It is not permitted to use this plates as machine endstops.
Roller cage: Size 1.5 and 2 mm: type CC Size 3, 6 (pitch t=9 mm) and 9mm (pitch t=14mm): type DD. Can be mounted in horizontal and vertical direction.
Air gab (0.08 mm approx.) between slide-top and base.
All mounting surfaces are precision ground. One flank of the slide (the side opposite to the adjustment screws) is ground parallel to the linear bearings to serve as a Reference Face.
The slide-top and - base are equipped with tapped 45attachment holes, drilled to a standard configuration.

Incorporates pre-loaded linear bearings type RSD and center rail, including plastic roller cages, type KZR.
Slide-top and -base have equal lengths.
Can be mounted in horizontal and vertical direction.
All mounting surfaces are precision ground. One flank of the slide (the side opposite to the adjustment screws) is ground parallel to the linear bearings to serve as a Reference Face.
The slide-top is equipped with tapped attachment holes, drilled to a standard configuration. The slidebase is equipped with countersunk-bored holes, which accept sockethead screws.

3 sizes.
Incorporates pre-loaded linear bearings type RSD and double-sided center rail as slide-base (through hardened), including roller cages.
Slide-top and -base have equal lengths.
Can be mounted in horizontal and vertical direction.
Rollercage: Size 1.5 and 2 mm: type CC Size 3 mm: type DD.
All mounting surfaces are precision ground. One flank of the slide (the side opposite to the adjustment screws) is ground parallel to the linear bearings to serve as a Reference Face
The slide-top and - base are equipped with tapped attachment holes, drilled to a standard configuration.

3 Sizes.
Ball cage is made of brass.
Can be mounted in horizontal and vertical direction (special designed U-shaped cage eliminates creeping of the cage and is limited by using inside screws).
Slide-top and center rail have equal lengths.
Mounting surfaces are fine machined by precision grinding.
All the flanks of the slide are ground parallel to the guideways and can serve as Reference Faces.
The slide-top and center rail are provided with tapped attachment holes, drilled to a standard configuration.